技術理論: 技術的…実践的…興味深い自動化産業ソリューション

DELCO valves

DELCO では、顧客満足の重要性を理解し、すべてのクライアントの独自のニーズを満たすよう努めています。信頼できるバルブ サプライヤーとして、当社は優れた顧客サービスと高品質の製品を提供し、最適なパフォーマンスと長寿命を確保することに尽力しています。信頼できる制御空気サプライヤーとして DELCO を選択すると、要件に合わせて特別に設計されたカスタマイズされたバルブ アセンブリのメリットが得られ、効率が向上し、ダウンタイムが短縮されます。

私について

Vポートボールバルブの設計上の特徴を探る

ボールバルブ are essential components in both industrial and residential pipeline systems, used to control the flow of liquids and gases. Depending on the design and diameter of the aperture, ball valves are classified into full-port, reduced-port, standard-port, and V-Port ball valves. This article delves into the design characteristics of V-Port ball valves.

Table of Contents

1. Classification of Ball Valves by Port Size

ボールバルブ are quarter-turn valves used to either shut off or allow the flow of fluid through a pipeline system. There are various types of ball valves designed for specific functions. Based on port size, ball valves can be categorized as follows:

  • Full-Port Ball Valves: The bore of a full-port ball valve matches the diameter of the inlet and outlet pipes. This design ensures that there is no resistance to fluid flow as the flow path remains straight.

  • Standard-Port Ball Valves: In standard-port ball valves, the bore is smaller than the diameter of the inlet and outlet pipes. This creates a narrower flow path inside the valve, resulting in increased flow resistance and higher pressure drop. The flow path is typically straight.

  • Reduced-Port Ball Valves: Reduced-port ball valves have an internal bore that is smaller by one pipe size compared to the pipeline. This design increases the velocity of the fluid passing through the valve.

  • V-Port Ball Valves: These ball valves feature a V-shaped seat or V-shaped ball, which allows for precise flow control.

2. What is a V-Port Ball Valve?

A V-Port ball valve is a type of control valve that incorporates a V-shaped seat or V-shaped ball. The V-shaped design facilitates more precise control of fluid flow. V-Port ball valves are distinguished by their molded V-shaped ports, which can have angles of 15°, 30°, 45°, 60°, or 90°.

V-Port ball valves are commonly used for fluid control due to their linear flow characteristics. Unlike standard-port ball valves, the flow rate through a V-Port ball valve increases linearly with the rotation of the valve stem. These valves are designed to handle high flow velocities with high strength.

3. How V-Port Ball Valves Work

V-Port ボールバルブ use a ball with a V-shaped aperture. The valve can be operated manually with a handle or automatically with an actuator. Rotating the handle opens or closes the valve while turning the ball. When the ball is rotated to the open position, the small end of the V-shaped port opens first, allowing for stable flow control. Reversing the rotation of the ball closes the valve. Opening or closing the valve typically requires a quarter-turn of the handle to align the port with the pipeline.

4. Design Parameters of V-Port Ball Valves

V-Port ball valves are designed with the following key parameters:

  • Materials: The valve body is typically made of stainless steel or carbon steel, while the valve stem is made from PEEK or metal.
  • Temperature Range: Suitable for operating temperatures ranging from -46°C to 343°C.
  • Port Angle: V-shaped ports come in various angles (15°, 30°, 45°, 60°, or 90°) to meet different flow control needs.

5. Choosing a V-Port Ball Valve

選択する際は V-Port ball valve以下の要素を考慮してください。

  • 圧力定格: Ensure the valve is rated for the pressure requirements of your application.
  • バルブサイズ: The valve should be appropriately sized for the pipeline system.
  • Materials: Choose materials compatible with the media being transported.
  • Temperature Rating: Verify that the valve can handle the temperatures of the application.
  • 接続タイプ: Select the valve with the appropriate connection type, such as flanged, welded, or threaded.

6. Advantages of V-Port Ball Valves

  • Precise Flow Control: Multiple V-shaped port angles provide equal percentage flow characteristics, allowing for accurate flow adjustments.
  • 低圧力損失: The flow path is typically straight, minimizing pressure loss across the valve. V-Port ball valves generally have a higher flow coefficient (Cv or Kv), allowing smaller valves to achieve the same flow rates as larger valves.
  • High Shutoff Pressure: V-Port ball valves are easy to operate and can handle high pressure with relatively low torque requirements.
  • Bubble-tight Shutoff: The floating ball principle used in V-Port ball valves ensures a tight seal, making them suitable for gas applications.

7. Disadvantages of V-Port Ball Valves

  • コストの上昇: V-Port ball valves are generally more expensive compared to other types of ball valves.
  • Irreparable Damage: If a V-Port ball valve is damaged, it may not be repairable and may need to be replaced.

8. Applications of V-Port Ball Valves

V-Port ball valves are ideal for applications requiring precise flow control. Their bubble-tight shutoff feature makes them popular in industries such as:

  • 食品および飲料加工
  • Water treatment
  • Chemical processing and storage
  • 医薬品製造

9. Frequently Asked Questions

How do I maintain a V-Port ball valve?

V-Port ball valves require minimal maintenance. Regular lubrication and inspection for faults or leaks are recommended.

What is the main difference between V-Port and standard ball valves?

The key difference is that V-Port ball valves have a V-shaped recess in the ball, while standard ball valves have a spherical recess.

What is the cost of a V-Port ball valve?

The price of a V-Port ボールバルブ depends on its size, material, and design. Custom requirements can also affect the cost.

産業用バルブの見積りをすぐに取得するにはどうすればいいですか?

For inquiries or quotes on valves, please contact us at +86 150 1535 8097 (phone/WhatsApp) or email marketing. お問い合わせ. DELCO offers high-quality valves with competitive prices and exceptional service, making us your ideal partner for valve solutions. We offer customization with no minimum order requirement. This article provides an in-depth look at V-Port ボールバルブ, covering their design, benefits, and applications. For more detailed information or specialized needs, consulting with industry experts is recommended.

DELCO では、顧客満足の重要性を理解し、すべてのクライアントの独自のニーズを満たすよう努めています。信頼できるコントロール バルブ サプライヤーとして、当社は優れた顧客サービスと高品質の製品を提供し、最適なパフォーマンスと長寿命を確保することに尽力しています。信頼できるコントロール バルブ サプライヤーとして DELCO を選択すると、要件に合わせて特別に設計されたカスタマイズされたバルブ アセンブリのメリットが得られ、効率が向上し、ダウンタイムが短縮されます。

さらに、当社の電子圧力調整器は価格競争力があるため、一流のソリューションを提供できます。大手コントロールバルブメーカーの 1 つとして、当社は業界標準を満たすだけでなく、お客様のビジネス全体の収益性にも貢献する信頼性の高いバルブをお届けすることに誇りを持っています。DELCO と提携することで、会社の長期的な成功のために賢明な選択をしているという安心感を得ることができます。

トップ

© 2024 広東DELCO株式会社

jaJapanese
en_GBEnglish es_MXSpanish de_DEGerman arArabic ru_RURussian viVietnamese hi_INHindi thThai id_IDIndonesian zh_TWChinese jaJapanese
上部へスクロール